Download EMULSIFYING WAX Catalouge

Sr. No.	TEST	RESULTS	LIMITS
1	Solubility	Complies B.P.	To Comply B.P.
2	Identification	Complies B.P.	To Comply B.P.
3	Acidity	0.26 ml of 0.1M NaOH reqd.	NMT 1.0ml of 0.1 M NaOH reqd.
4	Alkalinity	Complies B.P.	To Comply B.P.
5	Iodine Value	1.55	NMT 3.0
6	Saponification Value	0.87	NMT 2.0
7	Unsaponificable Matter	0.8753	NLT 86%
8	Alcohols	Complies B.P.	To Comply B.P.
9	Sodium alkyl sulphates	0.0973	NLT 8.7%
10	Water	0.0205	NMT 4.0%
11	Sulphated Ash	0.0242	Between 1.8 to 3.3%

COLOUR & APPEARANCE	CREAMISH WHITE FLAKES
ACIDITY	COMPLIES
IODINE VLAUE	0.25
SAPONIFICATION VALUE	0.48
UNSAPONIFIABLE MATTER	0.882
WATER % w/w	0.78
ALKALINITY	COMPLIES
SODIUM ALKYL SULPHATES	0.089
SULPHATED ASH	0.0245

Download COSMETIC RAW MATERIALS Catalouge

Sr.No.	Items	Uses	Packing  Kg/Ltrs
1	S.L.E.S.-28% (Sodium Lauryl Ether Sulphate)	Foaming & Cleansing Shampoo/Detergent Base	50/100/200
2	S.L.S. (Sodium Lauryl Sulphate)	Foaming & Cleansing Shampoo/Detergent Base	50/100/200
3	C.D.E.A (Cocodiethanolamide)	Foam Booster/Stabilizer	50/100/200
4	Cocoamide D.E.A.	Foam Booster/ Stabilizer	50/100/200
		(fatty acid base)
5	C.A.P.B.(COCAMIDO PROPYL BETAINE)	Foam Booster/ Stabilizer	50/100/200
5	C.M.E.A. (Cocomonoethanolamide)	Foam Booster/Stabilizer	25
6	I.P.M.	Penetrator + Emollient	30 Ltrs.
	(Iso Propyl Myristate)
7	I.P.P.	Penetrator + Emollient	30 Ltrs.
	(Iso Propyl Palmitate)
8	E.G.M.S. (Ethylene Glycol Mono Stearate)	Pearly Agent	20
9	Silicone Conditioner	Cyclo Silane	100 / 210
10	Speciality Detergents	For metal	100 / 210
11	Shampoo base	with conditioner pearly / clear	100 / 210
12	Hand Wash base	with conditioner pearly / clear	100 / 210
13	COSMOSIL – 10	Conditioner-Hair Separator Silicone	30/50/100
	(Clear Water Based)
14	COSMOSIL – 30	Conditioner-For Extra Shine Silicone	30/50/100
	(Milky Water Based)
15	COSMOSIL – 700	Conditioner-Silanes	50/100
	(Clear Water Based)
16	COSMOSIL 1100	Conditioner Silicone	50/100
	(100% Oil Based)
17	POLYQUAT – 7	Conditioner	50/100
18	POLYQUAT – 10 – 50%	Conditioner	200
	[20/50/100/700]
19	D –PANTHENOL	Scalp Conditioner	30 Kgs
20	ZPTO – 100 %	Anti-Dandruff	10 Kgs
21	POLYSILK-700	Hair Straightning Conditioner	50/100/200
22	Lanolin (Cosmetic grade)
23	T.R.O.-50% (Cosmetic grade)
24	Fabric Softener (Conc.)
25	Detergents for wollen, silk & Expensive cloths	Speciality detergents	100 / 210

1	MONEMUL – 60	(SORBITAN MONO STERATE)
2	SOFTEMUL – SE	(GLYCEROL MONO STERATE – SE)
3	SOFTEMUL – NSE	GLYCEROL MONO STERATE – NSE)
4	SOFTEMUL – 165	(GMS PLUS – FOR LOTIONS)
5	MONECOL – SS	(STEARYL STERATE)
6	MONECOL – PC	(CETYL PALMITATE)
7	MONECOL – SCS	(CETO STEARYL STERATE)
8	MONECOL – MSE	(ETHYLENE GLYCOL MONO STERATE)
9	MONECOL – DSE	(ETHYLENE GLYCOL DI STERATE)
10	MONECOL – MSP	(PROPYLENE GLYCOL MONO STERATE)
11	MONEMIDE – CD	(COCO DIETHANOLAMIDE)
12	MONEMIDE – CM	(COCO MONO ETHANOLAMIDE)
13	MONEMIDE – CPB	(COCO AMIDO PROPYL BETAIN)
14	MONEPEG – VIDS	(PEG 6000 DI STERATE)
15	PEG ESTERS OF DIFFERENT MOLECULAR WEIGHTS

Download COSMETIC CHEMICALS Catalouge

Download BEES WAX MSDS Catalouge

Bees Wax is made by bees from the pollen of a wide variety of flowers, bees wax has been used in art and industry for thousands of years. Chemical analysis of ancient cave paintings has shown that our distant ancestors used bees wax to produce the world’s first art and written history. Today, sculptors still use bees wax in the lost wax process– as do dental lab technicians and jewelers. The wax’s ability to burn long and clearly has for centuries made bees wax the favorite of candle makers.

Today the cosmetics industry is the largest user of beeswax, where it is used in the manufacture of lotions, lipsticks, suntan lotions, sun screens, and cold creams.

MATERIAL : REFINED BEES WAX GR. -IP

Malting Point	64’c.
Ash Percentage by mass	0.0018
Acid Value	0.0445
Iodine Value	9.01
Sap. Value	96

We manufacture seedlac which is formed from sticklac . Sticklac is first crushed and sieved to remove sand and dust. It is then washed in large vats again and again and at the same time rubbing the lac against the sides of the Vat to break open the insect bodies and dissolving the colouring matter in water. The lac thus cleaned is spread on large, clean, open air floor to dry. After drying, it is winnowed and sieved to get the commercial variety of Seedlac. Seedlac is mostly used for conversion into Bleached Shellac and different types of Shellac.

We have different type of Seedlac:

• Kusum Seedlak
• Bysakhi Seedlac
• Aluratic Acid

CHARACTERISTICS		MINIMUM	MAXIMUM
DENSITY	25o C.	930	940
COLOUR	GARDNER	-	15
MOISTURE/VOLATILES	% BY MASS	0	0.1
DRYING TIME	HOURS,MAX.	0	18
ACID VALUE	mg KOH/g.	1	6

	APPEARANCE AT 30 ° c	HYDROXYL VALUE	IODINE VALUE	HLB	SOLID CONTENT MIN.%	WATER CONTENT MAX.%
EO-2.5	Pale yellow viscous liquid	147±5	48-58	2.14	99.5	0.2
EO-5.0	Pale yellow viscous liquid	133±5	43-53	3.87	99.5	0.2
EO-10	Pale yellow viscous liquid	111±5	35-45	6.49	99.5	0.2
EO-20	Pale yellow viscous liquid	85±5	25-35	9.8	99.5	0.2
EO-30	Pale yellow viscous liquid	68±5	19-29	11.8	99.5	0.2
EO-35	Pale yellow viscous liquid	60±5	17-27	12.54	99.5	0.2
EO-40	Pale yellow viscous liquid	56±5	15-25	13.15	99.5	0.2
EO-50	Pale yellow to waxy solid	55±5	42297	14.83	99.5	0.2
EO-60	Pale yellow to waxy solid	41±5	42292	15	99.5	0.2
EO-80	Pale yellow to waxy solid	33±5	42228	16	99.5	0.2
EO-100	Pale yellow to waxy solid	28±5	42196	16.7	99.5	0.2
EO-200	Pale yellow to waxy solid	15±5	42196	18.2	99.5	0.2
HCO-20	yellow liquid	70-90	60-70	10.9	99.5	0.2
HCO-40	Waxy Liquid	60-80	50-60	14.1	99.5	0.2
HCO-60	Waxy Liquid	50-70	40-50	15.65	99.5

CHARACTERISTICS		MINIMUM	MAXIMUM
DENSITY	30o C.	950	980
IODINE VALUE	WIJS	100	-
COLOUR	GARDNER	-	8
VISCOSITY, POISES	25o C.	25	35
MOISTURE/VOLATILES	% BY MASS	0	0.1
ACID VALUE	mg KOH/g.	0	12

CHARACTERISTICS		MINIMUM	MAXIMUM
DENSITY	15o C.	860	900
VISCOSITY	40 o C. , cSt	2.5	6
FLASH POINT	o C.	110	--
SULPHUR	% BY MASS	0	0.005
CARBON RESIDUE	% BY MASS	0	0.05
WATER CONTENT	% BY MASS	0	0.05
COPPER CORROSSION	3 HRS, 50 o  C.	0	1
ACID VALUE	mg KOH/g.	0	0.5
INITIAL BOILING POINT	Degree C	210	-

USES : SOLVENT , EMULSIFIERS, LUBRICANT, ADJUVANT, DETERGENTS

PRECAUTIONS : RUBBER PARTS COMING IN CONTACT MAY DAMAGE. IT IS SUGGESTED TO REPLACE RUBBER PARTS WITH VITON.

Products for the Applicationin Lubricants, Gear oils, Engine Oils, Compressor Oils, Instrument Oils, Roliing Oils, Rust Preventive Oils, Knitting Oils, Cutting oils & Conning Oils etc.

No.
1	MONEMUL – 80	SORBITAN MONO OLEATE
2	MONEMUL – 85	SORBITAN TRI OLEATE
3	MONECOL – TOP	PENTAERYTHRITOL TETRA OLEATE
4	MONELUB – 603	TRIMETHYLOL PROPANE OLEATE
5	MONELUB – 405	NEOPENTYL GLYCOL OLEATE
6	MONEPEG’S	POLYETHYLENE GLYCOL ESTERS OF DIFFERENT MOLECULAR WEIGHTS CUSTOMER SPECIFIC  REQUIREMENTS.
7	MOLESAN	PIBSA AND PIBSA BASED   SURFACTANTS WITH DIFFERENT  NEUTARLISING RATIOS,  CLIENT SPECIFIC

The above products are used for their Anti Corrosive Properties along with their Synthetic base applications and also used as Emulsifiers in certain oils to wash out the oils after their applications easily.Apart from the above we can offer the Client Specific product, based on their specifications and requirements and Blends. The Oil soluble Emulsifiers can be offered based on their blend ratios and can be tested for the Emulsion stability requirements.

Test	Specifications	Result
Appearance :		Colourless clear liquid
Odour :		Practically odourless
Moisture :	1.0% Max.	0.004
Acid Value :	1.0 Max.	0.1
Iodinc Value :	1.0 Max.	0.4
Residue on Ignition % :	0.02 Max	0.01
Heavy Metals (as pH) P.P.M. :	20 Max.	0.1
Arsenic (as ), P.P.M. :	2 Max.	0.3
Microbiology :
– TVC :	300 Max. Cfu/g	COMPLIES
- M + Y:	10 Max. Cfu/g	COMPLIES
Assay % :	Min. 99	0.995
Specific Gravity @25°C :	0.847 – 0.853	0.84
LOT NO :	1469
MFG DATE :	40817
EXP.DATE :	42614

CHARACTERISTICS		MINIMUM	MAXIMUM
DENSITY	30o C.	900	935
VISCOSITY	40o C. , cSt	250	350
FLASH POINT	o C.	110	--
SULPHUR	% BY MASS	0	0.005
CARBON RESIDUE	% BY MASS	0	0.05
WATER CONTENT	% BY MASS	0	0.05
COPPER CORROSSION	3 HRS, 50o C.	0	3
ACID VALUE	mg KOH/g.	0	1.5
COLOUR	GARDNER	1	7

USES : SOLVENT , EMULSIFIERS, LUBRICANT, ADJUVANT, DETERGENTS

PRECAUTIONS : RUBBER PARTS COMING IN CONTACT MAY DAMAGE. IT IS SUGGESTED TO REPLACE RUBBER PARTS WITH VITON.

SORBITAN ESTERS (MONEMUL’S)
1.	MONEMUL™ – 80	Sorbitan Mono Oleate
2.	MONEMUL™ – 83	Sorbitan Sesqui Oleate
3.	MONEMUL™ – 85	Sorbitan Tri Oleate
4.	MONEMUL™ – 60	Sorbitan Mono Stearate
5.	MONEMUL™ – 40	Sorbitan Mono Palmitate
6.	MONEMUL™ – 20	Sorbitan Mono Laurate
GLYCEROL ESTERS (MONEGYL’S & SOFTEMUL’S)
1.	MONEGYL™ – O100	Glycerol Mono Oleate
2.	MONEGYL™ – GO60	Mono Di Glycerides
3.	MONEGYL™ – LS	Glycerol Mono Laurate
4.	MONEGYL™ – TO60	Glycerol Tri Oleate
5.	SOFTEMUL™ – SE	Glycerol Mono Stearate – SE
6.	SOFTEMUL™ – NSE	Glycerol Mono Stearate – NSE
7.	SOFTEMUL™ – AS	Glycerol Mono Stearate – AS
8.	SOFTEMUL™ – 165	GMS Plus
GLYCOL & FATTY ALCOHOL ESTERS (MONECOL’S)
1.	MONECOL™ – MSE	Ethylene Glycol Mono Stearate
2.	MONECOL™ – DSE	Ethylene Glycol Di Stearate
3.	MONECOL™ – TSP	Pentaerythritol Tetra Stearate
4.	MONECOL™ – DOP	Propylene Glycol Di Oleate
5.	MONECOL™ – MOP	Propylene Glycol Mono Oleate
6.	MONECOL™ – TOP	Pentaerythritol Tetra Oleate
7.	MONECOL™ – PC	Cetyl Palmitate
8.	MONECOL™ – SCS	Ceto Stearyl Stearate
9.	MONECOL™ – SS	Stearyl Stearate
FATTY AMIDES (MONEMIDE’S)
1.	MONEMIDE™ – CD	Coco Diethanolamide
2.	MONEMIDE™ – OD	Oleic Diethanolamide
PLASTIC ADDITIVES
1.	MONEPLAST  – HM
2.	MONELUB – 1816
3.	MONELUB – 518
4.	MONEPLUS™ – LQ
5.	MONEPLAST  – VHT
6.	MONELUB – 1801
7.	MONELUB – 1601
8.	MONELUB – 7401
OIL LUBRICANT  ADDITIVES
1.	MONELUB – 603	Trimethylol Propane Oleate
2.	MONELUB – 405	Neopentyl Glycol Oleate
DRILLING CHEMICALS
1.	MODRILL – DMD	Drilling Mud Detergent
2.	MODRILL – CIA	Acid Corrosion Inhibitor
3.	MODRILL – GCI	H2S Corrosion Inhibitor (Gas Line)
4.	MODRILL – WIN	Water Injection Corrosion Inhibitor
5	MODRILL – OCI	Oil Line Corrosion Inhibitor
6	MODRILL – EP	Extreme Pressure Lubricant (EP Lube)
7	MODRILL – SFW	Spotting Fluid Weighted
8	MODRILL – SFNW	Spotting Fluid Non Weighted
9	MONEGYL – PL	Poly-Glycerol
OTHERS
1.	MOLESAN  – 909	(Polymerised Emulsifier)
2.	MONESIN – 673	(Antiskinning agent for inks)
3.	MOWET – 010	(Wetting Agent)
3.	MONEOTH  – 002	(Antifoaming agent for Fermentation)
4.	MONEPEG	(PEG Esters of Oleic, Stearic etc. of mol. Wts.200-6000)

Download Wax Product List Catalouge